Glasfasersystemtechnik

Sealing element for cable – wall ducts

Glasfasersystemtechnik

Self-inflating pipe or core hole sealing

The system is based on the well-known airbag technology and is designed to ensure watertightness between an underground pipe and the cables inside it and to close the entrance of pipes in buildings, outdoor cabinets and transformer stations.

Non-binding inquiry
Structure, Laying, Imprint
Product description

This is a self-inflating element for gas- and watertight cable insertion into objects. It can be used to seal individual cables/pipes as well as bundles. This sealing solution impresses with its simple installation handling, for which no additional tools are required (any additional accessories required for installation are supplied).

 

 

Advantages over other sealing systems
  • No accessories required for inflation
  • No maintenance required (regular pressure checks)
  • Improved reliability, avoidance of the error of insufficient inflation
  • Can also be installed with water in the pipes
  • Flexible, easy to install, saves time during installation
  • Quick and easy removal

 

Advantages over other sealing systems

 

Technical data – Laboratory tests
Pressure After pulling on the release cord, a pressure of 300 ±30 kPa is built up inside. Used for sealing and closing occupied ducts with a maximum internal pressure of 50 kPa (5 m water column).
Temperature test 20 cycles of 12 hours at 50 kPa pressure, temperature change between -15° and + 30°C
Vibration test 10 days with 10 Hz frequency cycles, 6 mm amplitude and a pressure of 50 kPa
Mechanical tests Tensile test D/2 x 10 N (5h), twisting test (5 min in each direction) and folding test between 35 and 45 degrees (5 min in each direction)
Chemical resistance Hydrochloric acid (ph 2), sodium hydroxide (ph 12), sodium sulphate, sodium, chloride, diesel oil
Leak test Immersion in water for 48 hours at a pressure of 50 kPa in the line

 


 

Fire-resistant variant

Fire protection is an extremely important issue. That’s why we also offer the house design in a fireproof version that can withstand more than 2 hours in the event of a fire.
It prevents the spread of vapors and gases that are harmful to people.

 

Product Dates
Beschreibung

• Entworfen zur Ablage von Glasfaserkabeln und Spleißkassetten
• Funktionell, einfache Handhabung und gekennzeichnet durch höchste Flexibilität
• Zur Installation in 19”-Racksysteme
• Zur Glasfaserverteilung bzw. für Glasfaserabschluss

 

Eigenschaften

• Rückversetzbar und Ladenprinzip
• Höheneinheiten: 1HE und 2HE
• Einbautiefe: 250 mm
• Material: Stahlblech
• Pulverbeschichtet
• Farben: RAL 7024 (Graphitgrau) oder RAL 7035 (Lichtgrau) – andere Farben auf Anfrage
• Anzahl der Kupplungen bzw. Öffnungen: 2, 12, 24, 36, 48, 72 oder 96
• Universelles Spleißkassettenhaltesystem: einzeln oder stapelbar
• Mit austauschbaren Spleißhaltern und Anti-Twist-System.

 

Dimensionen


 

Ansichten

 

Technical Details
Downloads
CPR - Regulations
Product description

This is a self-inflating element for gas- and watertight cable insertion into objects. It can be used to seal individual cables/pipes as well as bundles. This sealing solution impresses with its simple installation handling, for which no additional tools are required (any additional accessories required for installation are supplied).

 

 

Advantages over other sealing systems
  • No accessories required for inflation
  • No maintenance required (regular pressure checks)
  • Improved reliability, avoidance of the error of insufficient inflation
  • Can also be installed with water in the pipes
  • Flexible, easy to install, saves time during installation
  • Quick and easy removal

 

Advantages over other sealing systems

 

Technical data – Laboratory tests
Pressure After pulling on the release cord, a pressure of 300 ±30 kPa is built up inside. Used for sealing and closing occupied ducts with a maximum internal pressure of 50 kPa (5 m water column).
Temperature test 20 cycles of 12 hours at 50 kPa pressure, temperature change between -15° and + 30°C
Vibration test 10 days with 10 Hz frequency cycles, 6 mm amplitude and a pressure of 50 kPa
Mechanical tests Tensile test D/2 x 10 N (5h), twisting test (5 min in each direction) and folding test between 35 and 45 degrees (5 min in each direction)
Chemical resistance Hydrochloric acid (ph 2), sodium hydroxide (ph 12), sodium sulphate, sodium, chloride, diesel oil
Leak test Immersion in water for 48 hours at a pressure of 50 kPa in the line

 


 

Fire-resistant variant

Fire protection is an extremely important issue. That’s why we also offer the house design in a fireproof version that can withstand more than 2 hours in the event of a fire.
It prevents the spread of vapors and gases that are harmful to people.

 

In the field of cable assembly, we offer comprehensive services.

Learn more

Whether fiber or copper cables: 
We connect it for you!