Glasfaserkabel
A-DF(ZN)2Y(SR)2Y
Glasfaserkabel
Loose tube construction, jelly filled cable core, watertight, rodent protection
Suited for outdoor use - for fixed laying in cable ducts, conduits or direct burial
Application
- FRP-central element
- jelly-filled loose tubes, SZ-cabling (if necessary with fillers)
- jelly-filled cable core (petrol jelly)
- strength members (aramide yarns)
- PE-inner sheath (1,5 mm), black
- corrugated steel tape, laminated
- PE-outer sheath (1,5 mm), UV-resistant, black
Fiber / tube colors
PENGG KABEL standard according to “Color codes – Fiber optic cables” in the document “General information” in the download area.
Upon customer request we can also manufacture according to other color codes (DIN, TIA / EIA-598 (MPO), IEC).
Standard marking
PENGG KABEL – cable type – fiber count/type – ID number – meter
On request
- dry-filled cable core
- increased tensile strength
- increased sheath thickness
- other sheath color
- colored stripes
- HDPE or LDPE sheath
- other marking
This data sheet describes a standard type.
Numerous variants are available on request.
| tube diameter mm |
number of tubes | max. fibers / tube | max. number of fibers | tensile strength approx. N |
weight approx. kg/km |
outer diameter approx. mm |
|---|---|---|---|---|---|---|
| 2,0
2,3 2,8 |
6*
5* 5* |
4
12 24 |
24
60 120 |
2.000
2.500 2.500 |
180
200 230 |
13,8
14,5 16,1 |
* at lower number of tubes corresponding blind elements are used
Technical data
according to IEC EN 60794-3 – Outdoor optical fibre cables
| tensile strength | see above table |
| compressive strength (crush) | 3000 N/10 cm |
| impact | 25 Nm |
| torsion | 5 cycles ±360° |
| kink, cable | The cable do not form a kink when a loop is drawn together to a diameter 12 times the cable outer diameter. |
| min. bending radius | R = 20 x D (cable outer diameter) |
| temperature range | storage and transport: -40°C up to +70°C installation: -5°C up to +60°C operation: -30°C up to +70°C |
| water penetration | No water on free end. |
Subject to technical alterations.
Application
- FRP-central element
- jelly-filled loose tubes, SZ-cabling (if necessary with fillers)
- jelly-filled cable core (petrol jelly)
- strength members (aramide yarns)
- PE-inner sheath (1,5 mm), black
- corrugated steel tape, laminated
- PE-outer sheath (1,5 mm), UV-resistant, black
Fiber / tube colors
PENGG KABEL standard according to “Color codes – Fiber optic cables” in the document “General information” in the download area.
Upon customer request we can also manufacture according to other color codes (DIN, TIA / EIA-598 (MPO), IEC).
Standard marking
PENGG KABEL – cable type – fiber count/type – ID number – meter
On request
- dry-filled cable core
- increased tensile strength
- increased sheath thickness
- other sheath color
- colored stripes
- HDPE or LDPE sheath
- other marking
This data sheet describes a standard type.
Numerous variants are available on request.
