Glasfaserkabel
I-VQ(ZN)H
Indoor/riser cable
Glasfaserkabel
Indoor/riser cable, metal-free, halogen-free, flame retardant
Robust riser cable for the FTTH area, ideal for vertical laying into existing cable ducts of buildings for example. Upon request, this cable is pre-assembled in practical installation boxes.
Application
- 2 or 4 tight buffered fibers:
- fiber with primary-coating (colored)
- sliding layer
- secondary-coating of acrylate, transparent
- aramid strength members
- FRNC-outer sheath acc. to IEC 60332-2, UV-resistant
Fiber colors
PENGG KABEL standard according to “Color codes – Fiber optic cables” in the document “General information” in the download area.
Upon customer request we can also manufacture according to other color codes (DIN, TIA / EIA-598 (MPO), IEC).
Sheath color
- grey (acc. to VDE 0888 / part 3)
- yellow (E9)
- orange (G50, G62,5)
- turquoise (G50 OM3)
Standard marking
PENGG KABEL – cable type – fiber count/type – ID number – CPR class CE-marking – meter
On request
- FRNC-sheath according to IEC 60332-3
- other sheath color
- pre-assembled with different connectors
- other marking
This data sheet describes a standard type.
Numerous variants are available on request.
| diameter secondary coating μm |
number of fibers | tensile strength* approx. N |
weight approx. kg/km |
outer diameter approx. mm |
fire load MJ/m |
|---|---|---|---|---|---|
| 600 600 900 |
2 4 2 |
400 400 400 |
7,5 8,0 8,5 |
2,8 2,8 3,0 |
0,25 0,25 0,3 |
* with reversible increase of the attenuation
Technical data
according to IEC EN 60794-2 – Indoor optical fibre cables
| tensile strength | see above table |
| compressive strength (crush) | 500 N/10 cm |
| impact | 2 Nm |
| min. bending radius | static: 15 x cable-diameter dynamic: 20 x cable-diameter |
| temperature range | storage and transport: -25°C up to +60°C installation: -10°C up to +50°C operation: -20°C up to +70°C |
Subject to technical alterations.
Application
- 2 or 4 tight buffered fibers:
- fiber with primary-coating (colored)
- sliding layer
- secondary-coating of acrylate, transparent
- aramid strength members
- FRNC-outer sheath acc. to IEC 60332-2, UV-resistant
Fiber colors
PENGG KABEL standard according to “Color codes – Fiber optic cables” in the document “General information” in the download area.
Upon customer request we can also manufacture according to other color codes (DIN, TIA / EIA-598 (MPO), IEC).
Sheath color
- grey (acc. to VDE 0888 / part 3)
- yellow (E9)
- orange (G50, G62,5)
- turquoise (G50 OM3)
Standard marking
PENGG KABEL – cable type – fiber count/type – ID number – CPR class CE-marking – meter
On request
- FRNC-sheath according to IEC 60332-3
- other sheath color
- pre-assembled with different connectors
- other marking
This data sheet describes a standard type.
Numerous variants are available on request.
