Glasfaserkabel
A-D(ZN)13Y
Glasfaserkabel
Loose tube construction, metal-free, longitudinally watertight, for conveyor chains
Suitable for further processing / stranding in conveyor chains compatible excavator lines
Application
- 2 jelly-filled loose tubes + 2 FRP-supporting elements, SZ-cabling
- Hytrel-outer sheath (1,0 mm), UV-resistant, black
Fiber / tube colors
PENGG KABEL standard according to “Color codes – Fiber optic cables” in the document “General information” in the download area.
Upon customer request we can also manufacture according to other color codes (DIN, TIA / EIA-598 (MPO), IEC).
Standard marking
PENGG KABEL – cable type – fiber count/type – ID number – meter
On request
- increased sheath thickness
- other sheath color
- other marking
This data sheet describes a standard type.
Numerous variants are available on request.
| tube diameter mm |
number of tubes | max. fibers / tube | max. number of fibers | tensile strength approx. N |
weight approx. kg/km |
outer diameter approx. mm |
|---|---|---|---|---|---|---|
| 2,6
2,8 |
2
2 |
13
24 |
26
48 |
1.200
1.200 |
45
55 |
7,3
8,0 |
Technical data
according to IEC EN 60794-3 – Outdoor optical fibre cables
| tensile strength | see above table |
| compressive strength (crush) | 1000 N/10 cm |
| impact | 10 Nm |
| kink, cable | The cable do not form a kink when a loop is drawn together to a diameter 12 times the cable outer diameter. |
| min. bending radius | R = 20 x D (cable outer diameter) |
| temperature range | further processing: up to +180°C installation: -25°C up to +80°C operation: -25°C up to +80°C |
| water penetration | No water on free end. |
Subject to technical alterations.
Application
- 2 jelly-filled loose tubes + 2 FRP-supporting elements, SZ-cabling
- Hytrel-outer sheath (1,0 mm), UV-resistant, black
Fiber / tube colors
PENGG KABEL standard according to “Color codes – Fiber optic cables” in the document “General information” in the download area.
Upon customer request we can also manufacture according to other color codes (DIN, TIA / EIA-598 (MPO), IEC).
Standard marking
PENGG KABEL – cable type – fiber count/type – ID number – meter
On request
- increased sheath thickness
- other sheath color
- other marking
This data sheet describes a standard type.
Numerous variants are available on request.
