Bahnkabel Glasfaserkabel
A-DQ(ZN)(L)2YRG2Y
Bahnkabel Glasfaserkabel
Railfoot cable, loose tube construction, metal-free, watertight, rodent protection, Aluminium-PE-composite-layer sheath, steel wire armouring
The fiber-optic railfoot cable is designed for use in telecommunication systems. It can be laid directly on the rail foot or other areas subjected to vibrations and impacts, but is also suitable for fixed laying in cable ducts, conduits or direct burial.
Bahnkabel Glasfaserkabel A-DQ(ZN)(L)2YRG2Y
Filling
Overall Shield, Reinforcement
Product Suitability
Application
- FRP-central element (2,1 mm); swellable elements
- jelly-filled loose tubes (2,0 mm), SZ-cabling
- swellable tape
- strength members (aramide yarns (dry cable core))
- 2 ripcords
- Aluminium-PE-composite-layer-sheath, black
- steel wire armouring (55 x 0,6 mm; galv.)
- steel fixing tape (0,1 mm; galv.)
- 2 ripcords
- PE-outer sheath (1,5 mm), UV-resistant, black
Fiber colors
red, green, blue, yellow
Tube colors
first tube red, other tubes yellow
Standard marking
PENGG KABEL – cable type – fiber count/type – ID number – meter
On request
- other fiber count
- other fiber colours
- other tube colours
- other marking
- increased sheath thicknesses
- other sheath colours
- other marking
This data sheet describes a standard type.
Numerous variants are available on request.
| tube diameter mm |
number of tubes | max. fibers / tube | max. number of fibers | tensile strength approx. N |
weight approx. kg/km |
outer diameter approx. mm |
|---|---|---|---|---|---|---|
| 2,0 | 6 | 4 | 24 | 3.500 | 310 | 15,6 |
Technical data
according to IEC EN 60794-3 – Outdoor optical fibre cables
| specification | DB TL 416.0510 |
| tensile strength | see above table |
| compressive strength (crush) | 3000 N/10 cm |
| impact | 25 Nm |
| torsion | 5 cycles ±360° |
| kink, cable | The cable do not form a kink when a loop is drawn together to a diameter 12 times the cable outer diameter. |
| min. bending radius | installation: ≥ 360 mm operation: ≥ 180 mm |
| temperature range | storage and transport: -25°C up to +70°C installation: -5°C up to +50°C operation: -25°C up to +60°C |
| water penetration | No water on free end. |
Subject to technical alterations.
Application
- FRP-central element (2,1 mm); swellable elements
- jelly-filled loose tubes (2,0 mm), SZ-cabling
- swellable tape
- strength members (aramide yarns (dry cable core))
- 2 ripcords
- Aluminium-PE-composite-layer-sheath, black
- steel wire armouring (55 x 0,6 mm; galv.)
- steel fixing tape (0,1 mm; galv.)
- 2 ripcords
- PE-outer sheath (1,5 mm), UV-resistant, black
Fiber colors
red, green, blue, yellow
Tube colors
first tube red, other tubes yellow
Standard marking
PENGG KABEL – cable type – fiber count/type – ID number – meter
On request
- other fiber count
- other fiber colours
- other tube colours
- other marking
- increased sheath thicknesses
- other sheath colours
- other marking
This data sheet describes a standard type.
Numerous variants are available on request.
